Beijing, China, November 19-21, 2017
__________________________________________________________________________
----------------
-----------------------------------------------------------------------------------------------------------ADCP2016 Spring Workshop
9th May, 2016, Aix-en-Provence, France
ADCP2016 Spring Workshop will be held in Aix-en-Provence, France, as a session of TMCE2016.
TMCE2016: Eleventh International Symposium on Tools and Methods of Competitive Engineering
9-13 May, 2016, Aix-en-Provence, France
Introduction
ADCP workshops offer a forum for presentation and discussion to bring advanced theories and technologies to the design and simulation of complex equipment and products, with a focus on computational design and evaluation methods and tools. ADCP2016 is taken as one session of TMCE2016, jointly organized by TU Delft and Tsinghua University based on a large MOE project, NSFC (National Natural Science Foundation Committee of China) projects, the Oversea Innovation Team Project of Tsinghua University, and MOE Joint Laboratory of Innovative Design and Manufacturing of Advanced Mechanical Systems. The theme of ADCP2016 Spring Workshop is practice-based modelling and simulation of products.
Chair:
Professor Yongsheng Ma
Department of Mechanical Engineering, Faculty of Engineering, University of Alberta, Canada
Keynote speaker Introduction
Professor Yongsheng Ma
Department of Mechanical Engineering, Faculty of Engineering, University of Alberta, Canada
Lecture topic：
Interdisciplinary physics phenomenon modeling via features─An engineering informatics methodology for industrial projects
Call for participants
Participants are welcome to present position papers or 1-3 slides at the workshop by submitting topics to Hou Yuemin by email with subject “ADCP2016 Spring”. Accepted topics will be invited to present at ADCP2016. Participant and presentation intention please send to hym01ATmails.tsinghua.edu.cn with subject “ADCP2016 Spring”.
Contact:
Dr. Hou Yuemin
Lab room 1043, Lee Shao Kee S&T Building
Design Institute,
Mechanical Engineering Department,
Tsinghua University
Tel: +86 (10) 62773470, Email: hym01ATTmails.tsinghua.edu.cn
__________________________________________________________________________
The New building of Mechanical Engineering Department. Design Institute will be in this new building since 2016.
__________________________________________________________________________________________
ADCP 2015 Winter Workshop
Special track: Design, Simulation and Experiment of Aircrafts
专题：飞机设计、仿真和试验 programTime: 9.00am-5.00pm, Dec. 3rd, 2015
Venue: Meeting Room 4304, Mechanical Engineering Department & Precision Instrument Department Building, Tsinghua University
Invited speakers:
1. Professor Qian Wei 钱卫教授
School of Aeronauticics and Astronautics 航天学院
Dalian University of Technology 大连理工大学
Lecture topic:
Transonic Wind Tunnel testing of aeroelastic wing model of Large transport aircrafts
大型运输机机翼弹性相似模型跨声速风洞气动弹性试验2. Dr. Andrea Da Ronch
Faculty of Engineering and the Environment
University of Southampton, UK
Lecture Topic:
Rapid Aeroelastic Loads Assessment Using CFD
3. Mr. Wang Yongzhi
China Academy of Aerospace Aerodynamics (CAAA)
Lecture Topic:Research on Gust Alleviation
阵风减缓研究
Registration
Pre-workshop registration is preferable, but not necessary. Attendance is free. The interested researchers can register by sending message with subject ADCP2015 Winter to: hym01Atmails.tsinghua.edu.cn
Contact
Dr. Hou Yuemin
Room 3408, Design Institute, Mechanical Engineering Department
Tsinghua University, Beijing, 100084
Tel: 86(10) 62773470, Email: hym01Atmails.tsinghua.edu.cn
________________________________________________________________________________________________________________________
ADCP2015
Time: September 18-20th, 2015
Venue: Hangzhou
_______________________________________________________________________________
Lecture
Topic: Environment Based Design (EBD) Methodology for Innovative and Creative Design
Speaker:
Prof. Yong Zeng
Concordia Institute for Information Systems Engineering, Concordia University, Canada
Time:
9.30am-11.30am, 13 July 2015
Venue:
Room 4304, Building 9003
Organizer:
Design Institute, Mechanical Engineering Department, Tsinghua University
Lecture Abstract:
The objective of design is to create a product that fulfills prescribed product requirements. The product can be a software system, a machine, a plan, or a policy. Therefore, design, especially innovative and creative design, affects greatly every part of our everyday life. In this talk, a new design methodology Environment Based Design will be introduced for a step-by-step procedure to support the generation of innovative and creative design solutions. This includes its semantic foundation – ROM (Recursive Object Model) and its three components using ROM – Environment Analysis, Conflict Identification, and Solution Generation. Examples will be given to show how EBD has been applied to different industrial sectors. Future trends in this research will also be discussed.
Course Name:
Rehabilitation robotics modelling and control
Lecturer:
Dr.-Ing. Berno Johannes Engelbert Misgeld, M.Sc.
Group leader of Biomechatronics/Feedback Control in Medicine Group
Senior scientific engineer
Chair of Medical Information Technology, Helmholtz-Institute for Biomedical Engineering,
RWTH Aachen University, Germany
Learning objectives of the course:
Students develop an advanced understanding of rehabilitation robotics system, devices and problems related to motor impairment. This includes the physiological background covering biomechanics and human sensory systems, specific for the task. Students understand and apply modern modelling and control techniques as well as advanced sensor applications.
Content of the course:
1. Introduction, historical review, example impairments, human‐machine interaction, example
applications
2. Physiological background, human sensory systems
3. Human motor pathologies
4. Review/recap multi‐body systems, two‐port representations, interaction stability
5. Robot aided gait therapy, compliant actuator designs and feedback control
6. Hybrid modelling of humanoid motion (Lagrange based approach/hybrid systems)
7. Introduction to biomechanics modelling (muscle and joint mechanics, Hill model and
extensions, EMG)
8. Trajectory control (Impedance control / linearisation / advanced concepts: Iterative learning
control)
9. Advanced sensor applications (Body sensor networks / Data fusion / Segment orientation
estimation, Extended Kalman Filter and advanced data fusion algorithms)
Course Organisation: The course consists of a two 90 min lectures and two 45 min exercises, both
held weekly.
Course Schedule:
Start in Academic Calendar week 16 in 2015: April – June 2015
Registration:
Through Graduate Office before the first class; on line on the first class.
___________________________________________________________________________________
__________________________________________________________
Advanced Design Concepts and Practice (ADCP)
ADCP 2014 Winter Workshop Program
Multidisciplinary Design Modeling and Analysis
多学科设计建模和分析
Venue: Meeting room 4304, Building 9003, Tsinghua University, Beijing, China
Time: 9.45am-6.00pm, 17 November 2014
Chairs
Prof. Ji Linhong, Tsinghua University
Prof. Chen Liping, Huazhong University of Science and Technology
Keynote Speaker
Prof. Offer Shai, Tel Aviv University, Israel
Topics:
1. Multidisciplinary Combinatorial Approach in Design and Analysis
2. Practical Applications of the Multidisciplinary Combinatorial Approach (MCA) (a new type of force: face force and system genes)
3. Knowledge Engineering Genome (a multidisciplinary perspective on tensegrity systems)
Prof. Chen Liping, Director of HUST CAD, Huazhong University of Science and Technology
Dr. Zhao Jingshan, Design Institute, Tsinghua University
Dr. Hou Yuemin, Design Institute, Tsinghua University
Language: English, Chinese中文
Sponsor
Oversea Collaborative Innovation Team Project of Tsinghua University
清华大学重点学科高水平国际合作创新团队项目
Organizer
Design Institute, Mechanical Engineering Department, Tsinghua University
Registration
No registration fee will be charged. Materials are available for registered participants by sending an email to hym01ATmails.tsinghua.edu.cn
Contact
Dr. Hou Yuemin
Tel: 86(10) 62773470, Email: hym01ATmails.tsinghua.edu.cn
_________________________________________
学术报告
面向系统设计的建模与计算研究与应用
(Systems oriented design modeling and computing: theory and applcation)
报告人：陈立平教授 (Prof. Chen Liping), 华中科技大学 (Huazgong University of Science and Technology) 国家CAD支撑软件工程技术研究中心 主任
报告时间： 2014.11月4日周二下午1.30-3.00pm
报告地点： 精密仪器系和机械工程系大楼会议室4304
报告简介 : 目前设计学科依附于各个专业学科，致使设计学与技术分散化、碎片化，不利于多学科融合的系统协同设计，为此试图提出独立的跨学科的系统原理，建立知识驱动的可计算的系统设计方法及工具.
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
_________________________________________________________
Seminar: Design Cognition and Computing
Time: November 4-7th, 2014
Venue: Meeting room 4304, Precision Instrument Department & Mechanical Engineering Department Building, Tsinghua University
lecturers:
Prof. John Gero, University of North Carolina, George Mason University, USA
Prof. Mary Lou Maher, University of North Carolina, USA
Program
1. 10:00-12:00am, Tuesday, Nov. 4th, morning
Topic: Innovation analytics: measuring the creativity of designs using machine learning
Lecturer: Professor Mary Lou Maher
2. 3:00-5:00pm, Tuesday, Nov. 4th, afternoon, FIT building.
Topic: DINKS: The design of Digital INteractive Keys for creative composition
Professor Mary Lou Maher
3. 10:00-12:00am, Wednesday, Nov. 5th, morning
Topic: Understanding Design: A Foundation for Design and Designing
Lecturer: Professor John Gero
4. 3:30-5:30pm, Wednesday, Nov. 5th, afternoon
Topic: Evaluating the quality of contributions in crowdsourcing design
Lecturer: Professor Mary Lou Maher
5. 10:00-12:00am, Thursday, Nov. 6th, 10:00-12:00am, morning
Topic: Computational Social Science in Design Research
Lecturer: Professor John Gero
6. 3:00-5:00pm, Thursday Nov. 6th afternoon
Topic: Models of expectation in evaluating creative designs
Lecturer: Professor Mary Lou Maher
7. 9:30-11:30am, Friday, Nov. 7th, 2014
Topic: Computational Models of Design Creativity
Lecturer: Professor John Gero
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer: Institute of Design Engineering, Tsinghua University
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
_____________________________________________________________
ADCP2014
The 4th International Workshop on Advanced Design Concepts and Practice
Stuttgart, Germany, 26th September 2014
From the left: Professor Colombo, Dr. Daniels, Professor Roller, Dr. Rusak, and Professor Horvath
_______________________________________________________________
Seminar Introduction
Topic:
Towards embodied human-system interaction based on affordances of cyber-physical system
Speaker:
Dr. Zoltán Rusák, Faculty of Industrial Design Engineering, Delft University of Technology, the Netherlands
Time: 9.00am-12.00am, 3rd July 2014
Venue: Meeting Room, FIT Building, Tsinghua University
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer: Institute of Design Engineering, Tsinghua University
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
________________________________________________________________
Seminar Introduction
Topics:
1. Towards social-cyber-physical systems, Part 1, Paradigm, concepts, technologies, implementations
2. Towards social-cyber-physical systems, Part 2, Socialization and personalization of CPSs
Speaker:
Prof. Dr. Imre Horváth, Faculty of Industrial Design Engineering, Delft University of Technology, the Netherlands
Time: 9.00am-12.00am, 1st-2nd July 2014
Venue: Meeting Room 4304, Precision Instrument Department Building, Tsinghua University
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer: Institute of Design Engineering, Tsinghua University
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
________________________________________________________________
Advanced Design Concepts and Practice (ADCP)
ADCP 2014 Web Conference
26 June 2014
Chairs
Professor Michel van Tooren, University of South Carolina, USA
Professor Ji Linhong, Tsinghua University, China
Theme:
Discussion of the proposal for internaional projects.
Organizer
Design Institute, Mechanical Engineering Department
Tsinghua University
Contact
Dr. Hou Yuemin
Room 3408, Design Institute, Mechanical Engineering Department
Tsinghua University, Beijing, 100084
Tel: 86(10) 62773470, Email: hym01@mails.tsinghua.edu.cn
________________________________
Advanced Design Concepts and Practice (ADCP)
ADCP 2014 Summer Workshop Program
Venue: Meeting room 4304, Precision Instrument Building
Tsinghua University, Beijing, China
Time: 8.30am-7.00pm, 24 June 2014
http://adcp2012.com
Chairs
Professor Ji Linhong, Professor Michel van Tooren
Tsinghua University University of South Carolina, USA
Keynote Speaker
Professor Tetsuo Tomiyama, Cranfield University, UK
Lecture Topic
Functional Allocation Theory – Systems Architecting Method for Mechatronics Systems
Invited Presentations
Professor Yongsheng Ma, University of Alberta, Canada
Professor Yusheng Liu, Zhejiang University, China
Professor Shana S. Smith, Taiwan Universtiy
Dr. Yong Chen, Shanghai Jiao Tong University, China
Sponsor
Tsinghua Univerisy
National Natural Science Foundation of China
Organizer
Design Institute, Mechanical Engineering Department
Tsinghua University
Registration
No registration fee will be charged, but attendees at the workshop need to register by sending an email to Hou Yuemin through hym0@mails.tsinghua.edu.cn.
Contact
Dr. Hou Yuemin
Room 3408, Design Institute, Mechanical Engineering Department
Tsinghua University, Beijing, 100084
Tel: 86(10) 62773470, Email: hym01@mails.tsinghua.edu.cn
________________________________
ADCP2014 Spring Workshop
Frontier of Design Science
Tsinghua University, Beijing
13.30-17.00pm, March 28th, 2014
Organizers
Tsinghua University
Science Press
Co-Organizers
Hunan University
Huazhong University of Science and Technology
Shanghai Jiaotong University
Noesis Solutions NV
Sponsors
National Natural Science Foundation of China
Speakers
- Ji Linhong, Introduction
- Niu Yufeng, Science Press, Introduction to “State key publishing projects”
- Hou Yuemin, Proposal on book series of “Frontier of Design Science”
- Han Xu, Hunan University
- Chen Liping, Huazhong University of Science and Technology
- Du Jianbin, Tsinghua University
- Jiang Jiyun, Noesis Solutions NV
Theme
The theme of the web conference is to work out a proposal for application on “State key publishing projects”. The discussion will focus on book titles, book contents and outlines, academic committee, author introductions, forms, submission date and related issues.
Contact: Dr. Hou Yuemin
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
************************2013**************************
Events and Activities
_________________________________________________
Seminar Introduction
Lecture topics:
1. Scaling up: From Collaborative Design to Crowdsourcing Design
2. Computational Approaches to Evaluating and Enhancing Creative Design
Lecturer:
Dr. Mary Lou Maher, Professor and Chair
Department of Software and Information Systems, College of Computing and Informatics
University of North Carolina Charlotte, USA
Time:
Oct. 23rd, 1.30pm
Scaling up: From Collaborative Design to Crowdsourcing Design
Oct. 24th, 1.30pm:
Computational Approaches to Evaluating and Enhancing Creative Design
Venue:
Precision Instrument Department Building, Meeting room 4304
Organizer:
Design Institute of Mechanical Engineering Department
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering, Tsinghua University
http://adcp2012.com
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
________________________________________________
Seminar Introduction
Lecturer
Dr.John Gero, Research Professor, UNC Charlotte, Krasnow Institute for Advanced Study and George Mason University
Topics
Oct. 23rd, afternoon, 3.00pm
Understanding Design: A Foundation for Design and Designing
Oct. 24th, morning, 9.30am, afternoon, 3.00pm
Cognitive Studies of Designers: What Are Designers Doing When They are Designing
Oct 25th, morning, 9.30am
Understanding Creativity and Innovation: Computational Models of Creativity and Innovation
Venue
Meeting Room 4304, (4501 on Oct. 25th)Precision Instrument & Mechanology Department Building, Tsinghua University
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering, Tsinghua University
http://adcp2012.com
Contact
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470, hym01 at mails.tsinghua.edu.cn
_______________________________________
Advanced Design Concepts and Practice (ADCP)
ADCP 2013 Summer Workshop programm Speakers
Venue: JIasuo Hotel, Tsinghua University, Beijing, China
Time: 9.30am-17.30pm, 16 August 2013
Keynote Speaker
Dr. Panos Y. Papalambros
Professor of University of Michigan
Lecture Topic
Design Science and Optimization: Analysis-based Design of Products and Systems
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering
Tsinghua University
http://adcp2012.com
Contact
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
---------------------------------------------------------------------
Seminar introduction
Topic:
Design Science and Optimization: Analysis-based Design of Products and Systems
Speaker:
Dr. Panos Y. Papalambros, Professor of University of Michigan
Time:
August 16, 2013, Tsinghua University, Beijing
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering
Tsinghua University
http://adcp2012.com
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
__________________________________
Oversea Short Course Introduction
Name: Design Research Methodology and Design of Smart Products with Matlab/Simulink
Course No: Y0120091
Lecturers:
Prof. Imre Horváth，Dr. Zoltán Rusák, Faculty of Industrial Design Engineering, TU Delft
The examination form:
Research design and plans using the methodology taught in the course.
Hours: 16 hours
Credit: 1
Time: June 17th-19th, 2013
Venue: Room 305, Teaching Building No.1, CAD Center (North side), Tsinghua University
June 17th: 9:30-12:00, 14:00-16:00
June 18th: 9:3012:00, 14:00-16:00
June 19th: 9:30-12:00, 14:00-17:00
June 21th: 9:30-12.:00
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Graduate School of Tsinghua University
Institute of Design Engineering
Tsinghua University
http://adcp2012.com
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
___________________________
D-Robots (Design Robots, 设计机器人 )
Time： 9.30am-17.00pm, June 5th-6th, 2013
Venue: Room 4501, Building 9003, Tsinghua University
Introduction:
This seminar will open a discussion on a new concept named D-Robots (Design Robots) for computational synthesis. Professor Michel van Tooren and Dr. Hou Yuemin will deliver talks on D-Robots, including definition, roles, tasks, configuration, implementation, and examples. Ph.D Students will present their current works on the design and simulation system for discussion.
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
___________________________________________________________________________
Seminar
Multi fields design and simulation: modelling and algorithms
Time: Evening , 7.00 pm, Monday and Friday, (May 20th，27th, 31th, June 3rd, 7th) , 2013
Venue: Room 3310, Precision Instrument Department Building, Tsinghua University
Speaker: Dr. Hou Yuemin
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
Lecture 1: Principles of modelling products
1. Components oriented model
2. Working states oriented model
3. Design space
4. Working states oriented processing chamber systems model
Developmental design of chamber systems: multi agent systems, D-Robot
Lecture 2: Biology inspired design process and mechanisms: six stages and three developmental mechanisms
Biology inspiration
Design framework
Algorithms:
Biology inspiration: cellular automate, neural networks, Genetic algorithms
Mathematics: graph, dual and game, nonlinear programming, sparse matrix theory
Promising: gene transcription algorithms
Software: KBE, rules based reasoning, production rules, agent technology
Lecture 3: Multi-agent systems for multi-fields design and simulation
Methodology
Agent roles
Agent configuration
Multi-agent system for multi-field design and simulation
Chamber system case
Lecture 4: D-Robots (design robots)
Function, roles, gene transcription, configuration, path plan
Lecture 5: Control of designing
Dynamics of design
Order parameters and control parameters
Prototyping of chamber systems
___________________________________________________
Seminar
Topic
1. Methodology of weight prediction and systematic evaluation of structural joints
2. Models for analysis of chamber systems
Speaker:
Laura Beilstein, Institute of Aircraft Design, Stuttgart University
Time: Feb. 25, 2013
Venue: Building 9003, Meeting Room 2501, Tsinghua University
Contact: Hou Yuemin,
tel: 010-62773470,
email: hym01 at mails.tsinghua.edu.cn
_______________________________________
Seminar Program 1 2
Lecturer: Dr. Stephen Daniels, Dublin City University, Ireland
Lecture 1
Topic: Plasma Processing in Semiconductor Manufacturing
Chair: Professor Xu Jun, Tsinghua University
Time: Jan. 8th, 2013, 10.30 am
Venue: Meeting Room 4304, Precision Instrument & Mechanology Department, Tsinghua University
Lecture 2
Topic: Identification and Reduction of Variation in Plasma Processing Tools.
Chair: Professor Ji Linhong, Tsinghua University
Time: Jan. 10th , 2013, 2.00pm
Venue: Meeting Room 4501, Precision Instrument & Mechanology Department, Tsinghua University
Organizer: Design Engineering Institute
Sponsor: International Collaboration Innovation Team Project of Tsinghua University
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
____________________________________________________________________________
Seminar: Program
Topic: Inventive Engineering
Lecturer: Prof. Tomasz Arciszewski, Department of Civil Engineering, George Mason University, USA
Topics and Time
1. Bio-Inspiration in Inventive Design
Jan. 2, 2013, 3.00 pm
Chair: Professor Yao Qiang, Tsinghua University
2. Inventive Engineering: An Outline
Jan. 3, 2013, 10.00 am
Chair: Professor Chu Fulei, Tsinghua University
3. Successful Education: the Key to Inventive Engineering
Jan. 3, 2013, 1.30 pm
Chair: Professor JI Linhong, Tsinghua University
4. Edison’s System and Modern Innovation Engineering
Jan. 4, 2013, 10.00 am
Chair: Professor Ji Linhong, Tsinghua University
Venue: Meeting Room 4304, Precision Instrument& Mechanology Dept.
Organizer: Design Engineering Institute
Sponsor: International Collaboration Innovation Team Project of Tsinghua University
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
_______________________________________________________________
_______________________________________________________________
Seminar program
1. Next Generation Design Systems: Knowledge-Based Multi-disciplinary Design Optimization
Lecturers：
Prof. Michel van Tooren
Mr. Reinier van Dijk
Aerospace Faculty, Delft University of Technology
Time：2012-11-8 9.00am
Venue: Precision Instrument & Mechanology Department, Meeting Room 4404, Tsinghua Universtiy
2. Knowledge-Based Design Environments: Software Development
Lecturers：
Prof. Michel van Tooren
Mr. Reinier van Dijk
Aerospace Faculty, Delft University of Technology
Time：2012-11-6 19.00pm
Venue: Precision Instrument & Mechanology Department, Meeting Room 4306, Tsinghua Universtiy
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
___________________________________________
November 26, 2012November 8, 2012
ADCP2012-Second web conference
Chair
Professor Ji Linhong, Tsinghua University
Professor Michel van Tooren, TU Delft
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
_______________________________________________________________________________
September 21-Oct. 8, 2012 program
Advanced Design Theories and Technology for Complex Systems (3):
Seminar: Similarity Theory and Design Methodology for Complex Engineering Systems
Lecturer
Priv.-Doz. Dr.-Ing. Stephan Rudolph University of Stuttgart, Germany
Lectures:
1. Similarity Theory: Foundations
September 21, 2012, 9.30 am
2. Similarity Theory: Applications in Design
September 24, 2012, 3.00 pm
3. Design Theory and Methodology Engineering Complex Systems
September 26, 2012, 7.20 pm
4. Design Languages for Engineering Complex Systems
October 10, 2012, 7.20 pm
Contact
_______________________________________________________________________________
Dr. Hou Yuemin
Institute of Design Engineering, Precision Instruments and Mechanology Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
__________________________________________________________________________
September 5-7, 2012 program
Seminar: An introduction to Knowledge Engineering and Design Automation
Lecturer: Prof. Giorgio Colombo, Politecnico di Milano, Italy
Venue: Tsinghua University, Precision instrument and Mechanology Department,
Meeting room 4304, 4th floor （清华大学精密仪器系四楼会议室）
The seminar is sponsored by the International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Contact: Hou Yuemin, hym01@mails.tsinghua.edu.cn, tel: 62773470
September 5, 2012 Morning session: 9.00-11.45 am
1. Knowledge, Product Development and Information Technology
2. Parametric CAD and Design Rules representation
September 6, 2012Morning session: 9.00-11.45 am
1. The birth of KBE: Object-oriented modeling and Product Development
2. MEDEA: a methodology to collect and formalize knowledge and develop DA applications
September 7, 2012Morning session: 9.00-11.45 am
1. Knowledge Engineering applied to Rehabilitation Engineering
2. Open issues in Knowledge Engineering (knowledge and PLM, new IT tools, …)3. Conclusions
_________________________________________________________________________
August 17, 2012
ADCP2012-First web conference
Chair
Professor Michel van Tooren, TU Delft
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
Agenda
1. Agreement on web meeting outcome
2. Review Project Objective &Scope
- a. Objective & Scope of each participant
- b. Joint objective & Scope
3. Review expected Project Deliverables joint/per partner
4. Status of the deliverables
- a. Workshops
- b. Visits (prof, PhD, MSc)
- c. Software tools
- d. Experiments
- e. Hardware
- f. Books
- g. Articles
5. Organisation of the Project management
- a. Definition and tracking of Activities
- b. Communication of info and progress (www.adcp2012.com ?)
- c. Roles and responsibilities
- d. Planning and control tools
6. Next web meeting
_______________________________________________________________________________
July 23, 2012
Seminar, Tsinghua University
_______________________________________________________________________________
Advanced Design Theories and Technology for Complex Systems (1)
Lecturer: Dr. Zoltán Rusák,
Faculty of Industrial Design Engineering, Delft University of Technology
Venue
Meeting room 4304, Precision Instrument & Mechanology Department, Tsinghua University
Lecture 1: Designing of Natural User Interfaces for Rehabilitation Robots.
Lecture 2: Methods and Tools for Abstract Prototyping of Chamber Systems of IC Equipments
___________________________________________________________________________
June 28-July 3, 2012
Seminar, Tsinghua University
Advanced Design Theories and Technology for Complex Systems (1) Program
Lecturer: Dr. Zoltán Rusák,
Faculty of Industrial Design Engineering, Delft University of Technology
Venue
Meeting room 4304, Precision Instrument & Mechanology Department,
Tsinghua University
Lecture 1: Natural User Interface Design.
June 28, 2012, 8.30-11.45 am: lecture; 1.30-4.45 pm: reading reference materials and discussion
Lecture 2: Case Studies of NUI Design of Complex Systems.
June 29, 2012, 8.30-11.45 am: lecture; 1.30-4.45 pm: reading reference materials and discussion
Lecture 3: Conceptualizing and Testing Smart Products and Systems on Matlab/Simulink
July 3, 2012, 8.30-11.45 am: lecture; 1.30-4.45 pm: reading reference materials, discussion and practice, tutorial is available
Contact:
Dr. Hou Yuemin
Institute of Design Engineering, Tsinghua University
Tel: 010-62773470.
Email: hym01 at mails.tsinghua.edu.cn (please send email with subject “Seminar”)
____________________________________________________________________________________________
May 10, 2012
ADCP2012, Karlsruhe, Germany
Chair
Professor Dieter Roller, The Universtiy of Stuttgart
Professor Michel van Tooren, TU Delft
Professor Ji Linhong, Tsinghua Universtiy
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
________________________________________________________________________
November 14, 2011
Lecture,Tsinghua University
Speaker: Dr. Hou Yuemin
Lecture Topic: the Bridge between the Function and Structure
Venue: Room 3310, Institute of Design Engineering, Precision Instrumnet & Mechanology Department
Time: 7.00-10.00pm
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
________________________________________________________________________
July 5-9, 2011
ADCP2011, Tsinghua University
Chair
Professor Ji Linhong, Tsinghua Universtiy
Professor Michel van Tooren, TU Delft
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
Events and Activities
_________________________________________________
Seminar Introduction
Lecture topics:
1. Scaling up: From Collaborative Design to Crowdsourcing Design
2. Computational Approaches to Evaluating and Enhancing Creative Design
Lecturer:
Dr. Mary Lou Maher, Professor and Chair
Department of Software and Information Systems, College of Computing and Informatics
University of North Carolina Charlotte, USA
Time:
Oct. 23rd, 1.30pm
Scaling up: From Collaborative Design to Crowdsourcing Design
Oct. 24th, 1.30pm:
Computational Approaches to Evaluating and Enhancing Creative Design
Venue:
Precision Instrument Department Building, Meeting room 4304
Organizer:
Design Institute of Mechanical Engineering Department
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering, Tsinghua University
http://adcp2012.com
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
________________________________________________
Seminar Introduction
Lecturer
Dr.John Gero, Research Professor, UNC Charlotte, Krasnow Institute for Advanced Study and George Mason University
Topics
Oct. 23rd, afternoon, 3.00pm
Understanding Design: A Foundation for Design and Designing
Oct. 24th, morning, 9.30am, afternoon, 3.00pm
Cognitive Studies of Designers: What Are Designers Doing When They are Designing
Oct 25th, morning, 9.30am
Understanding Creativity and Innovation: Computational Models of Creativity and Innovation
Venue
Meeting Room 4304, (4501 on Oct. 25th)Precision Instrument & Mechanology Department Building, Tsinghua University
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering, Tsinghua University
http://adcp2012.com
Contact
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470, hym01 at mails.tsinghua.edu.cn
_______________________________________
Advanced Design Concepts and Practice (ADCP)
ADCP 2013 Summer Workshop programm Speakers
Venue: JIasuo Hotel, Tsinghua University, Beijing, China
Time: 9.30am-17.30pm, 16 August 2013
Keynote Speaker
Dr. Panos Y. Papalambros
Professor of University of Michigan
Lecture Topic
Design Science and Optimization: Analysis-based Design of Products and Systems
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering
Tsinghua University
http://adcp2012.com
Contact
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
---------------------------------------------------------------------
Seminar introduction
Topic:
Design Science and Optimization: Analysis-based Design of Products and Systems
Speaker:
Dr. Panos Y. Papalambros, Professor of University of Michigan
Time:
August 16, 2013, Tsinghua University, Beijing
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Institute of Design Engineering
Tsinghua University
http://adcp2012.com
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
__________________________________
Oversea Short Course Introduction
Name: Design Research Methodology and Design of Smart Products with Matlab/Simulink
Course No: Y0120091
Lecturers:
Prof. Imre Horváth，Dr. Zoltán Rusák, Faculty of Industrial Design Engineering, TU Delft
The examination form:
Research design and plans using the methodology taught in the course.
Hours: 16 hours
Credit: 1
Time: June 17th-19th, 2013
Venue: Room 305, Teaching Building No.1, CAD Center (North side), Tsinghua University
June 17th: 9:30-12:00, 14:00-16:00
June 18th: 9:3012:00, 14:00-16:00
June 19th: 9:30-12:00, 14:00-17:00
June 21th: 9:30-12.:00
Sponsor
International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Organizer
Graduate School of Tsinghua University
Institute of Design Engineering
Tsinghua University
http://adcp2012.com
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
___________________________
D-Robots (Design Robots, 设计机器人 )
Time： 9.30am-17.00pm, June 5th-6th, 2013
Venue: Room 4501, Building 9003, Tsinghua University
Introduction:
This seminar will open a discussion on a new concept named D-Robots (Design Robots) for computational synthesis. Professor Michel van Tooren and Dr. Hou Yuemin will deliver talks on D-Robots, including definition, roles, tasks, configuration, implementation, and examples. Ph.D Students will present their current works on the design and simulation system for discussion.
Contact:
Hou Yuemin
Institute of Design Engineering, Mechanical Engineering Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
___________________________________________________________________________
Seminar
Multi fields design and simulation: modelling and algorithms
Time: Evening , 7.00pm, Monday and Friday, (May 20th，27th, 31th, June 3rd, 7th)
Venue: Room 3310, Precision Instrument Department Building, Tsinghua University
Speaker: Dr. Hou Yuemin
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
Lecture 1: Principles of modelling products
1. Components oriented model
2. Working states oriented model
3. Design space
4. Working states oriented processing chamber systems model
Developmental design of chamber systems: multi agent systems, D-Robot
Lecture 2: Biology inspired design process and mechanisms: six stages and three developmental mechanisms
Biology inspiration
Design framework
Algorithms:
Biology inspiration: cellular automate, neural networks, Genetic algorithms
Mathematics: graph, dual and game, nonlinear programming, sparse matrix theory
Promising: gene transcription algorithms
Software: KBE, rules based reasoning, production rules, agent technology
Lecture 3: Multi-agent systems for multi-fields design and simulation
Methodology
Agent roles
Agent configuration
Multi-agent system for multi-field design and simulation
Chamber system case
Lecture 4: D-Robots (design robots)
Function, roles, gene transcription, configuration, path plan
Lecture 5: Control of designing
Dynamics of design
Order parameters and control parameters
Prototyping of chamber systems
___________________________________________________
Seminar
Topic
1. Methodology of weight prediction and systematic evaluation of structural joints
2. Models for analysis of chamber systems
Speaker:
Laura Beilstein, Institute of Aircraft Design, Stuttgart University
Time: Feb. 25, 2012
Venue: Building 9003, Meeting Room 2501, Tsinghua University
Contact: Hou Yuemin,
tel: 010-62773470,
email: hym01 at mails.tsinghua.edu.cn
_______________________________________
Seminar Program 1 2
Lecturer: Dr. Stephen Daniels, Dublin City University, Ireland
Lecture 1
Topic: Plasma Processing in Semiconductor Manufacturing
Chair: Professor Xu Jun, Tsinghua University
Time: Jan. 8th, 2013, 10.30 am
Venue: Meeting Room 4304, Precision Instrument & Mechanology Department, Tsinghua University
Lecture 2
Topic: Identification and Reduction of Variation in Plasma Processing Tools.
Chair: Professor Ji Linhong, Tsinghua University
Time: Jan. 10th , 2013, 2.00pm
Venue: Meeting Room 4501, Precision Instrument & Mechanology Department, Tsinghua University
Organizer: Design Engineering Institute
Sponsor: International Collaboration Innovation Team Project of Tsinghua University
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
____________________________________________________________________________
Seminar: Program
Topic: Inventive Engineering
Lecturer: Prof. Tomasz Arciszewski, Department of Civil Engineering, George Mason University, USA
Topics and Time
1. Bio-Inspiration in Inventive Design
Jan. 2, 2013, 3.00 pm
Chair: Professor Yao Qiang, Tsinghua University
2. Inventive Engineering: An Outline
Jan. 3, 2013, 10.00 am
Chair: Professor Chu Fulei, Tsinghua University
3. Successful Education: the Key to Inventive Engineering
Jan. 3, 2013, 1.30 pm
Chair: Professor JI Linhong, Tsinghua University
4. Edison’s System and Modern Innovation Engineering
Jan. 4, 2013, 10.00 am
Chair: Professor Ji Linhong, Tsinghua University
Venue: Meeting Room 4304, Precision Instrument& Mechanology Dept.
Organizer: Design Engineering Institute
Sponsor: International Collaboration Innovation Team Project of Tsinghua University
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
_______________________________________________________________
Seminar program
1. Next Generation Design Systems: Knowledge-Based Multi-disciplinary Design Optimization
Lecturers：
Prof. Michel van Tooren
Mr. Reinier van Dijk
Aerospace Faculty, Delft University of Technology
Time：2012-11-8 9.00am
Venue: Precision Instrument & Mechanology Department, Meeting Room 4404, Tsinghua Universtiy
2. Knowledge-Based Design Environments: Software Development
Lecturers：
Prof. Michel van Tooren
Mr. Reinier van Dijk
Aerospace Faculty, Delft University of Technology
Time：2012-11-6 19.00pm
Venue: Precision Instrument & Mechanology Department, Meeting Room 4306, Tsinghua Universtiy
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
___________________________________________
November 26, 2012November 8, 2012
ADCP2012-Second web conference
Chair
Professor Ji Linhong, Tsinghua University
Professor Michel van Tooren, TU Delft
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
_______________________________________________________________________________
September 21-Oct. 8, 2012 program
Advanced Design Theories and Technology for Complex Systems (3):
Seminar: Similarity Theory and Design Methodology for Complex Engineering Systems
Lecturer
Priv.-Doz. Dr.-Ing. Stephan Rudolph University of Stuttgart, Germany
Lectures:
1. Similarity Theory: Foundations
September 21, 2012, 9.30 am
2. Similarity Theory: Applications in Design
September 24, 2012, 3.00 pm
3. Design Theory and Methodology Engineering Complex Systems
September 26, 2012, 7.20 pm
4. Design Languages for Engineering Complex Systems
October 10, 2012, 7.20 pm
Contact
_______________________________________________________________________________
Dr. Hou Yuemin
Institute of Design Engineering, Precision Instruments and Mechanology Department
Tsinghua University, Beijing 100084, China
Tel: 8610-62773470
hym01 at mails.tsinghua.edu.cn
__________________________________________________________________________
September 5-7, 2012 program
Seminar: An introduction to Knowledge Engineering and Design Automation
Lecturer: Prof. Giorgio Colombo, Politecnico di Milano, Italy
Venue: Tsinghua University, Precision instrument and Mechanology Department,
Meeting room 4304, 4th floor （清华大学精密仪器系四楼会议室）
The seminar is sponsored by the International Collaboration Innovation Team Project of Tsinghua University
(重点学科高水平国际合作创新团队支持项目)
Contact: Hou Yuemin, hym01@mails.tsinghua.edu.cn, tel: 62773470
September 5, 2012 Morning session: 9.00-11.45 am
1. Knowledge, Product Development and Information Technology
2. Parametric CAD and Design Rules representation
September 6, 2012Morning session: 9.00-11.45 am
1. The birth of KBE: Object-oriented modeling and Product Development
2. MEDEA: a methodology to collect and formalize knowledge and develop DA applications
September 7, 2012Morning session: 9.00-11.45 am
1. Knowledge Engineering applied to Rehabilitation Engineering
2. Open issues in Knowledge Engineering (knowledge and PLM, new IT tools, …)3. Conclusions
_________________________________________________________________________
August 17, 2012
ADCP2012-First web conference
Chair
Professor Michel van Tooren, TU Delft
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
Agenda
1. Agreement on web meeting outcome
2. Review Project Objective &Scope
- a. Objective & Scope of each participant
- b. Joint objective & Scope
3. Review expected Project Deliverables joint/per partner
4. Status of the deliverables
- a. Workshops
- b. Visits (prof, PhD, MSc)
- c. Software tools
- d. Experiments
- e. Hardware
- f. Books
- g. Articles
5. Organisation of the Project management
- a. Definition and tracking of Activities
- b. Communication of info and progress (www.adcp2012.com ?)
- c. Roles and responsibilities
- d. Planning and control tools
6. Next web meeting
_______________________________________________________________________________
July 23, 2012
Seminar, Tsinghua University
_______________________________________________________________________________
Advanced Design Theories and Technology for Complex Systems (1)
Lecturer: Dr. Zoltán Rusák,
Faculty of Industrial Design Engineering, Delft University of Technology
Venue
Meeting room 4304, Precision Instrument & Mechanology Department, Tsinghua University
Lecture 1: Designing of Natural User Interfaces for Rehabilitation Robots.
Lecture 2: Methods and Tools for Abstract Prototyping of Chamber Systems of IC Equipments
___________________________________________________________________________
June 28-July 3, 2012
Seminar, Tsinghua University
Advanced Design Theories and Technology for Complex Systems (1) Program
Lecturer: Dr. Zoltán Rusák,
Faculty of Industrial Design Engineering, Delft University of Technology
Venue
Meeting room 4304, Precision Instrument & Mechanology Department,
Tsinghua University
Lecture 1: Natural User Interface Design.
June 28, 2012, 8.30-11.45 am: lecture; 1.30-4.45 pm: reading reference materials and discussion
Lecture 2: Case Studies of NUI Design of Complex Systems.
June 29, 2012, 8.30-11.45 am: lecture; 1.30-4.45 pm: reading reference materials and discussion
Lecture 3: Conceptualizing and Testing Smart Products and Systems on Matlab/Simulink
July 3, 2012, 8.30-11.45 am: lecture; 1.30-4.45 pm: reading reference materials, discussion and practice, tutorial is available
Contact:
Dr. Hou Yuemin
Institute of Design Engineering, Tsinghua University
Tel: 010-62773470.
Email: hym01 at mails.tsinghua.edu.cn (please send email with subject “Seminar”)
____________________________________________________________________________________________
May 10, 2012
ADCP2012, Karlsruhe, Germany
Chair
Professor Dieter Roller, The Universtiy of Stuttgart
Professor Michel van Tooren, TU Delft
Professor Ji Linhong, Tsinghua Universtiy
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
________________________________________________________________________
November 14, 2011
Lecture,Tsinghua University
Speaker: Dr. Hou Yuemin
Lecture Topic: the Bridge between the Function and Structure
Venue: Room 3310, Institute of Design Engineering, Precision Instrumnet & Mechanology Department
Time: 7.00-10.00pm
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
________________________________________________________________________
July 5-9, 2011
ADCP2011, Tsinghua University
Chair
Professor Ji Linhong, Tsinghua Universtiy
Professor Michel van Tooren, TU Delft
Contact:
Dr. Hou Yuemin,
tel: 8610-62773470
email: hym01 at mails.tsinghua.edu.cn
